SMA Sunny Island 2012 Technical Description page 80

(First) Commissioning
If there is an error message
If the device displays an error message, this error must be fixed before the device can be
put into operation. Use the information in section 18 "Troubleshooting/Problem Solving"
(Page 184).
Parameter Lists
Further details concerning the modifiable parameters are found in chapter 17 "Parameter
List Overview" (Page 160).
Note that you must first enter the installer password before some parameters can be
changed (see section 10.3.2 "Setting the Installer Password" (Page 102)). In addition,
some parameters can only be changed in standby mode (see section 10.1.2 "Stopping"
(Page 85)).
80 SI2012_2224-TEN082311
SMA Solar Technology AG
Technical Description