SMA Solar Technology AG
5 Opening and Closing
The enclosure of the Sunny Island has a removable lid. Remove this cover only when installing the
device or for required maintenance or repair work.
5.1 Opening the Sunny Island
1. Stop the Sunny Island as described in section 9.2 "Stopping the Sunny Island (Standby)"
(page 61).
2. Disconnect the Sunny Island from voltage sources as described in chapter 9.4 "Disconnect the
device from voltage sources" (page 62).
3. Ensure that the system cannot be accidentally switched on again.
4. Loosen all 6 screws on the enclosure lid and set
them aside.
5. Remove the enclosure lid and set it aside.
☑ The Sunny Island is open.
Technical Description
Opening and Closing
SI5048-TEN093630
27