Installation; Required Tools And Resources - SMA Sunny Island 2012 Technical Description

Installation

5 Installation
Take note of the required installation conditions specified in the sections below before mounting,
installing and commissioning the Sunny Island.

5.1 Required Tools and Resources

The following tools and materials are recommended for mounting and installing the island grid
system:
Tools (not included in delivery)
Stripping pliers
Drill (e.g. stone drill), Ø 6 to 10 mm
Drill
Crimping tool for cable lug
Torque wrench (4 Nm to 10 Nm), 13 mm socket wrench
4 mm allen wrench
Cable knife
Ratchet (including extension)
Combination pliers
13 mm open end/ring wrench
Multimeter
Diagonal cutting pliers
Phillips screwdriver, PH1and PH2
Flathead screwdriver, 0.4 x 2.5 mm/1.0 x 10 mm/1.0 x 5.5 mm
Spirit level
Material (not included in delivery)
Cable end sleeves
Wall anchors for the wall bracket (e.g. SX 10)
Cable ties
AC cable (3 leads, 2.5 mm² each)
DC cable (95 mm² max.)
Cable lug for DC cable
hexagon bolts, 8x60 mm, washers
22 SI2012_2224-TEN082311
SMA Solar Technology AG
Technical Description