Mounting The Sunny Island With A Wall Mounting Bracket - SMA Sunny Island 2012 Technical Description

SMA Solar Technology AG

5.2.5 Mounting the Sunny Island with a Wall Mounting Bracket

1. Use the wall bracket as a drilling template.
.
Number of drilled holes used
• When mounting onto a wall, use at least two of the horizontal holes and the lowest
one in the middle.
• When mounting onto a post use at least three of the holes in the middle (use the
superior one in any case).
Mounting Material
When mounting the wall bracket use mounting material which is suited to the fundament.
In doing this, observe that the weight of the Sunny Island is approximately 18 kg.
Technical Description
315.9 mm
260 mm
170 mm
SI2012_2224-TEN082311
Installation
27