SMA Sunny Island 2012 Technical Description page 96

Operating the Sunny Island
The display changes
The generator status and the reason for its deployment are shown (alternating)
under "Generator-Status" in the display.
•
•
6. Relays
= relay activated
o = relay deactivated
7. Warning:
! = Warning
The symbol blinks until you have seen and cleared the warning in menu "410# Fail
Current" or "420# Fail History".
Faults: If there is a fault, the device goes into standby. A fault notice appears on the
display. Acknowledge and clear the fault; then the Sunny Island can be restarted.
Change to Standard View 1
The display switches to standard view 1 (home screen) automatically if the Sunny Remote
Control 1 has not been used for more than five minutes (inactivity).
Display Illumination
The background illumination is automatically deactivated after a short time of inactivity.
Switch the lighting back on by turning the pushbutton slightly. This turning changes no
settings; it only reactivates the display illumination.
Message Displays
Messages are displayed at all times during operation, they have priority over the
standard view 1 (home screen).
96 SI2012_2224-TEN082311
If, for example, the display changes every 3 seconds from "*" to "B", this
means that the generator voltage and frequency lie within the specified limits
and that the generator was requested as a result of the battery charge level.
If the generator has been manually set to "Stop", then no generator status
information is shown on the display. The field remains empty.
SMA Solar Technology AG
Technical Description