Table of Contents
Advertisement
4-7 Iw16A0)
AUTOMATIC AIR CONDITIONING SYSTEM
16 . Receiver Drier
A: REMOVAL AND INSTALLATION
1) Recover refrigerant.
2) Remove high-pressure hose attaching bolts .
Plug high-pressure hose and receiver drier connections
immediately after disconnecting piping to prevent en-
try of dirt, dust, water, etc.
rig. /.'I&
4) Separate bracket from receiver dryer.
T
v
Receiver
drier
Bracket
0
o
v
04-651
Fig. 161
5) To install, reverse removal procedures .
Replace old O-ring (used with piping) with new one,
and apply a coat of compressor oil to it before install-
ing.
Tightening torque : N "m (kg-m, ft-lb)
Pipe attaching bolts
5.4-9 .3 (0 .55-0.95, 4.0-6.9)
Mounting bolts
5.4-9 .3 (0 .55-0.95, 4.0-6.9)
rig. I ov
68
3) Remove receiver drier bracket attaching bolts .
Advertisement
Table of Contents
Troubleshooting
