Subaru SVX 1992 Manual page 1001

4-7 (w15A0) AUTOMATIC AIR CONDITIONING SYSTEM
15 . Condenser
A: REMOVAL
1) Remove front grille .
2) Remove belt cover.
3) Disconnect radiator fan harness connectors (main
and sub).
4) Remove upper radiator bracket .
Belt Cover j
'° a
Upper bracket
/ nC
C4-644
Fig. 153
5) Disconnect high-pressure hose from condenser.
Plug high-pressure hose and condenser connections
immediately after disconnecting piping to prevent dirt,
dust, water, etc .
1
_ ~ I 11. O
;
1 ~-
i
High pressure
/ hose
0
~C4-645
Fig . 154
6) Remove main and sub radiator fans . Remove water
hose located under radiator fan shroud .
rig . I 55
7) Move canister aside.
8) Disconnect trinary switch harness connector .
9) Disconnect receiver dryer-to-condenser high pres-
sure hose .
Plug high-pressure hose, receiver dryer and condenser
connections immediately after disconnecting hoses to
prevent entry of dirt, dust, water, etc.
Ng . 7 56
10) Lift up vehicle .
11) Remove undercover .
12) Remove both side bolts securing oil cooler with
condenser .
rig. 7 5/
66