Subaru SVX 1992 Manual page 1047

AUTOMATIC AIR CONDITIONING SYSTEM jT11C21 4-7
1 . CHECK OUTPUT SIGNALS FOR AUTO AMPLI-
FIER.
1) Remove auto amplifier .
2) Place cover on sunload sensor to block sunlight .
3) Turn ignition switch ON .
4) Measure voltage between auto amplifier connector .
Connector £r Terminal/Specified voltage :
(i16) 13 - 11/Approx. 5 V
1-1g. lli
2. CHECK INPUT SIGNALS FOR AUTO AMPLI-
FIER.
1) Remove cover from sunload sensor, allowing sun-
light to hit sunload sensor .
2) Measure voltage between auto amplifier connector.
If sunlight is slight, move lit 100 watt electric bulb
toward sunload sensor to ensure voltage changes.
Fig . 228
5V
m
2 .94V
0
0
0 .768 kW (660 kcal/h, 2,619 BTU/h)/m2
[0 .0713 kW (61 .31 kcal/h, 243.3 BTU/h)/sq ft)
C4-711
Connector £r Terminal/Specified voltage :
(i16) 13 - 11/Approx. 2 .94 V
Fig. 229
113