Suzuki Safety Support (If Equipped) - Suzuki IGNIS 2022 Series Manual

Table of Contents

Advertisement

Canceling speed limiter
• To cancel the speed limiter, push "CAN-
CEL" switch (2). The set indicator (5) will
go off.
• To resume the previously set speed,
push up the "RES +/SET –" switch (3)
and turn on the set indicator (5).
To turn off the speed limiter system, push
"LIMIT" switch (1) and check that limit indi-
cator (4) is off.
Also, you can turn off the speed limiter by
turning off the engine.
NOTE:
If you turn off the speed limiter system, the
previously set speed in the memory is
cleared. Set your speed again.
SUZUKI SAFETY SUPPORT
(if equipped)
Dual camera brake support
(if equipped)
Dual camera brake support is a system
that detects obstacles or partition lines in
front of your vehicle by the stereo camera,
attempts to avoid a collision by giving
warning to the driver, and attempts to
reduce damage in the event of a collision.
WARNING
• Dual camera brake support has lim-
its and may not function properly
depending on the driving condi-
tions. Do not rely excessively on
the system and always drive in a
safe manner.
• For safety reasons, do not check
the operation of the system by
yourself.
• Check that all passengers fasten
their seat belts when the vehicle is
being operated.
When the system is activated, there
is a risk of serious injury from
being thrown.
OPERATING YOUR VEHICLE
NOTE:
• While the system is working, if a vehicle
in front of you moves outside of the ste-
reo camera's detection field or the vehi-
cle can no longer be detected, the
system may stop functioning.
• While the system is working, a braking
sound may be heard even if you do not
depress the brake pedal, but this is nor-
mal.
3-46

Advertisement

Table of Contents
loading

Table of Contents