AudioCodes E-SBC User Manual page 402

CHAPTER 18 Core Entities
[IPGroup_
TypeSBCServerAuthType]
'OAuth HTTP Service'
oauth-http-service
[IPGroup_OAuthHTTPService]
'Username'
username
[IPGroup_Username]
'Password'
password
[IPGroup_Password]
Parameter
Mediant 1000 Gateway & E-SBC | User's Manual
Description
■ [-1] According to Global Parameter = (Default)
Authentication is according to the settings of the
SBCServerAuthMode parameter.
■ [0] Authentication is performed locally = The
device authenticates incoming SIP requests locally.
For more information, see
Functionality on page 740.
■ [2] According to draft-sterman-aaa-sip-01 = The
device authenticates incoming SIP requests using a
remote RADIUS server, based on Internet Draft
"draft-sterman-aaa-sip-01". For more information,
see RADIUS-based User Authentication
page 740.
■ [3] Authenticate with OAuth authorization = The
device authenticates incoming SIP requests
according to token-based authentication with an
OAuth2 Authorization server. The Authentication
server is configured as a Remote Web Service and
is assigned to the IP Group using the IP Group's
'OAuth HTTP Service' parameter. For more
information, see OAuth2-based User Authentication
on page 741.
Assigns a Remote Web Service to the IP Group. The
Remote Web Service represents the OAuth
Authorization server, which the device uses to
authenticate incoming SIP requests as a server. The
device sends the OAuth token received from the client to
the Authorization server for authentication.
To configure Remote Web Services, see
Remote Web Services on page 243. For more
information on OAuth-based authentication, see
OAuth2-based User Authentication
Note: The parameter is applicable only if the IP Group's
'SBC Server Authentication' parameter is configured to
Authenticate with OAuth authorization.
Defines the shared username for authenticating the IP
Group.
The valid value is a string of up to 60 characters. By
default, no username is defined.
Note: If you configure the 'Authentication Mode'
parameter to SBC as Server, you need to specify the
SIP request (method) types (e.g., INVITE) that must be
challenged by the device, using the IP Group's
'Authentication Method List' parameter.
Defines the shared password for authenticating the IP
Group.
The valid value is a string of up to 51 characters. By
default, no password is defined.
- 364 -
SIP Authentication Server
on
Configuring
on page 741.