AudioCodes E-SBC User Manual page 421

CHAPTER 18 Core Entities
Item #
■
■
6
1.
2.
7
1.
2.
8
■
■
■
Routing: Opens the IP-to-IP Routing table where you can configure IP-to-IP
routing rules (see Configuring SBC IP-to-IP Routing
SBC Settings: Opens the SBC General Settings page where you can configure
miscellaneous settings.
Configured Trunk Groups. Each Trunk Group is displayed using the following "Trunk
Group"-titled icon, which includes the row index number:
To edit or delete the Trunk Group, click the icon, and then from the drop-down menu,
choose Show List to open the Trunk Group table.
To add a Trunk Group, do the following:
Click the Add Trunk Group
Trunk Groups or as
The Trunk Group table opens, allowing you to configure a Trunk Group.
Configure the Trunk Group as desired, and then click Apply; the Trunk Group
table closes and you are returned to the Topology View, displaying the new
Trunk Group and a line connecting it to the associated port, as shown in the
example below:
For more information on configuring Trunk Groups, see
Displays the device's hardware configuration concerning telephony (Tel/PSTN)
trunks and ports. It also displays the number of ports. The ports are displayed as
round icons, as shown in Item #6 above.
To configure a digital trunk, do the following:
Click the icon, and then from the drop-down menu, choose Trunk Settings; the
Trunk Settings page appears.
Configure the trunk as desired.
For more information on configuring trunk settings, see
Links to Web pages relating to commonly required Gateway configuration:
Number Manipulation: Opens the Destination Phone Number Manipulation for
IP-to-Tel Calls table where you can configure destination phone number
manipulation rules for IP-to-Tel calls (see
Tables).
Routing: Opens the IP-to-Tel Routing table where you can configure IP-to-Tel
routing rules (see Configuring IP-to-Tel Routing
DTMF & Dialing: Opens the DTMF & Dialing page where you can configure
DTMF and dialing related settings.
Mediant 1000 Gateway & E-SBC | User's Manual
Description
plus icon. The icon appears next to existing
when there are no Trunk Groups.
Configuring Number Manipulation
Rules).
- 383 -
Rules).
Configuring Trunk Groups.
Configuring Trunk Settings.