AudioCodes E-SBC User Manual page 406

CHAPTER 18 Core Entities
7. Configure the address of the Proxy Set according to the parameters described in the table
below.
8. Click Apply.
Table 18-6: Proxy Sets Table and Proxy Address Table Parameter Description
Parameter
'SRD'
voip-network
proxy-set > srd-
id
[ProxySet_SRDName]
General
'Index'
configure voip >
voip-network
proxy-set
[ProxySet_Index]
'Name'
proxy-name
[ProxySet_ProxyName]
'Gateway IPv4 SIP
Interface'
gwipv4-sip-int-
name
[ProxySet_
GWIPv4SIPInterfaceN
ame]
Assigns an SRD to the Proxy Set.
Note:
■ The parameter is mandatory and must be configured first before
you can configure the other parameters in the table.
■ To configure SRDs, see
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating the
row in other tables.
The valid value is a string of up to 40 characters.
Note:
■ Each row must be configured with a unique name.
■ The parameter value cannot contain a forward slash (/).
Assigns an IPv4-based SIP Interface for Gateway calls to the
Proxy Set.
Note:
■ At least one SIP Interface must be assigned to the Proxy Set.
■ The parameter appears only if you have configured a network
interface with an IPv4 address in the IP Interfaces table (see
Configuring IP Network
■ To configure SIP Interfaces, see
- 368 -
Mediant 1000 Gateway & E-SBC | User's Manual
Description
Configuring SRDs.
Interfaces).
Configuring SIP Interfaces.