Emerson Daniel 3410 Series Operation Manual page 93

Operations manual
DAN-20057316
which data point changed, the date and time of the change, and both the 'as-found' and
'as-left' values.
The meter can store up to 3000 audit records. The user can select whether old, unread
records can be overwritten by new records when the log becomes full via the data point
DoOverwriteUnreadAuditLog. This point can be modified using the Daniel MeterLink
Tools > Edit/Compare Configuration screen. The default is to overwrite old, unread
records. Refer to
information on reading records and marking records as read. The data point
IsAuditLogFull indicates whether or not the audit log is full and cannot overwrite old,
unread records.
The data points monitored and collected for the audit log are as shown in
through
listed alphabetically.
The groupings are as follows:
• AGA8
• AGA10
• Calibration
• Chord Proportions
• Co-located meter
• Communications
• Data Logging
• Expansion Correction
• Flow analysis
• Frequency, Digital, and Analog Signals
• Gas chromatograph
• General
• HART
• Indicators
• Local display
• Meter Information
• Pressure & Temperature
• Reynolds Number Calculation
• Signal Processing
• Tracking
For information on a particular data point, consult Daniel MeterLink online help.
Model 3418 GUSM
Options for reading audit, alarm, and/or system log records
Event log: alarm/audit below. The points are grouped and, within each group, are
Directory
January 2019
for
Audit log
93