Communications
January 2019
•
System log
•
Save your meter's configuration file
•
Use the Tools > Edit/Compare Configuration menu to display the dialog. Enable the
View All or Metrology radio button and click Read.
The All View displays the meter's extended configuration parameters. Grayed out
values are read-only, but help describe the configuration. The Metrology View displays
the path dimensions, pipe diameter, transducer delay parameters, zero flow calibration
coefficients, and flow calibration coefficients.
Click the question mark icon, , for the data point to display additional information.
•
Click Save to save the configuration file. By default, the file is saved to the Data Folder
setup in File > Program Settings.
Customize Daniel MeterLink settings
Open Daniel MeterLink and access File > Program Settings, then input the desired settings
for your meter. Your user name and company name is included on reports and logs
generated with Daniel MeterLink.
Figure 2-1: Program Settings
•
User name
•
Company name
•
Data folder (where meter's data is stored)
18
Operations manual
DAN-20057316
Operations manual