Emerson Daniel 3410 Series Operation Manual page 134

Commands
January 2019
2. Once your cabling and Meter Directory record are setup, attempt the connection to
3. At the prompt to Attempt FTP-only connection, click Yes. If successful, the Daniel
4. Go to Tools > Program Download to attempt the firmware upgrade again. If the
5. If the configuration is lost, a configuration file was saved by the Program Download
6. If the firmware upgrade fails again, contact Daniel Technical Support for assistance.
7.1.8 Communications analyzer
The Communications Analyzer is a Windows
transmitted to and received from an addressable device, such as a Modbus slave, by
another Windows
The messages are display from the oldest (at the top of the list) to the newest (at the
bottom of the list). The Communications Analyzer date and time stamps each message
displayed. After 4096 messages have been displayed, the oldest messages are cleared
from the list as new messages are added.
The Address combo box filters new messages so that only those with the selected address
(1-32) are displayed. By default, all addresses are displayed. The address filter does not
affect messages already displayed, only new messages.
134
192.168.135.100 with a subnet of 255.255.255.0. Ensure your PC has a
compatible address and attempt a connection using this IP address.
the meter. You will receive a message Error 10001 opening database connection to,
click OK.
™
MeterLink caption reads ...Connected to <meter name>.
firmware upgrade is successful, the meter should start working as normally as the
meter's configuration is not normally lost.
utility on the initial firmware upgrade attempt.
Use Edit/Compare Configuration to write this saved configuration back to the
meter. The saved configuration files are typically stored in C:\Ultrasonic Data
\<MeterName>.
Contact information can be found in Daniel MeterLink
menu by selecting Technical Support. Or, in the Customer service in the preface of
this manual.
®
application.
™
under the Help pull down
®
application that displays "messages"
Operations manual
DAN-20057316
Operations manual