Emerson Daniel 3410 Series Operation Manual page 41

Operations manual
DAN-20057316
Model 3418 GUSM
Table 5-1: Data Points for dry calibration
™
Daniel MeterLink Data points, options and guidelines
Display Name
Forward A0 Data points affected:
•
0 Options:
•
Guidelines:
•
Forward A1 Data points affected:
•
1 Options:
•
Guidelines:
•
Forward A2 Data points affected:
•
2 Options:
•
Guidelines:
•
Forward A3 Data points affected:
•
3 Options:
•
Guidelines:
•
Reverse A0 Data points affected:
•
0 Options:
•
Guidelines:
•
FwdA
Enter a value (m/s or ft/s) within the range [-1,1 m/s].
This value should only be modified under direction of Daniel
personnel.
FwdA
Enter a value (dimensionless) within the range [0.95, 1.05].
This value should only be modified under direction of Daniel
personnel.
FwdA
Enter a value (s/m or s/ft) within the range [-0.1, 0.1].
This value should only be modified under direction of Daniel
personnel.
FwdA
2 2 2
Enter a value (s /m or s /ft
2
m ].
This value should only be modified under direction of Daniel
personnel.
RevA
Enter a value (s/m or s/ft) within the range [-1, 1].
This value should only be modified under direction of Daniel
personnel.
Configurations
January 2019
2
) within the range [-0.1, 0.1 s
2
/
41