Emerson Daniel 3410 Series Operation Manual page 113

Operations manual
DAN-20057316
4. If desired, a comment may be included in the log file by entering it in the display/
5. In the Log Format field, select Microsoft
6. Select the Default view for either Technician or Engineer. The log file captures all
7. To begin collecting logs, click the Start button. Daniel MeterLink collects the
8. Daniel MeterLink displays the Log Complete message box after the logs are
9. To view the Microsoft
10. Select the Workbook report view from the Microsoft
11. Charts is the default view when you open the Maintenance Log.
Model 3418 GUSM
The duration value can be changed by clicking the number in the display/edit box
and entering a new value.
edit box provided.
Values (CSV), as this format is not compatible with the generation of graphics,
trending and analysis offered by 3410 Series Gas Ultrasonic Flow Meters and
® ®
Microsoft Excel . CSV should only be used if the computer does not have
® ®
Microsoft Excel . Once the file is collected in the CSV format, it can not be
converted to a Microsoft
the data regardless of the view setting selected. If the Technician view is selected,
some of the data will be hidden. The view can be changed when the Microsoft
®
file is opened then selecting View > Custom Views or by un-hiding the
Excel
columns by selecting Format > Column > Unhide.
meter's configuration and then begins collecting all the data from the meter.
collected.
Figure 6-2: Log complete dialog
®
Excel
of the page. Tab selections include:
• Charts
• Inspection Report
• Meter Config
• Raw Data
®
Figure 6-3: Microsoft Excel
® ®
Excel . DO NOT select Comma Separated
® ®
Excel format.
®
file, select YES to open the Workbook.
®
report view toolbar
Directory
January 2019
® ®
Excel toolbar at the bottom
®
113