Emerson Daniel 3410 Series Operation Manual page 120

Commands
January 2019
This dialog's options include:
• View and edit configurations collected from the meter or opened from a file.
• Write all or a portion of changed parameters of a configuration to a connected meter.
• Comparing and converting legacy configurations
• Save and Print configurations
Procedure
1. Click Read to collect and display a configuration from a connected meter.
2. Click ALL to display the meter's extended configuration or Metrology to display only
3. Double-click the Value to change a parameter and select the option from the drop-
4. Click the question mark icon, , to the right of a data point to display the additional
5. Click Write All to write the full configuration to a meter. Depending on the View
6. Open a configuration in the editor and select Meter or select File to compare it to a
7. Click Compare to either read the configuration from the meter or open the Open
120
the metrology portion of the configuration.
down list or if a caret is displayed, enter the value
If you change a data register, the Value displayed in the dialog turns yellow and the
check box is selected. You can later choose to only Write Checked values to the
meter.
Figure 7-2: Edit/Compare configuration parameter changes
information.
selected, the displayed configuration may not be the full configuration. Click Write
Checked to write only the values with a selected check box next to the value and are
visible in the currently selected view. Select any values to write and clear any values
you don't want to write to the meter before clicking Write Checked.
configuration saved as a file.
dialog box to select the configuration to compare to the one in the editor.
Once the configurations are selected, a dialog displays, providing options to further
customize the compare operation.
Operations manual
DAN-20057316
Figure 7-2.
Operations manual