Emerson Daniel 3410 Series Operation Manual page 17

Operations manual
DAN-20057316
2. The Import Meter Directory File dialog which allows you to select a meter
Export a meter record
Use the Export command to save the current meter directory to file. Select File > Meter
Directory from the Meter Directory drop-down menu or click Export.
Procedure
1. Enable the meter directory record checkbox you want to export or click Select All.
2. Click OK to begin exporting the meter record(s). Use the Export Meter Directory File
3. Click Save. If you have an existing METER_DIRECTORY_EXPORT.DAT file, you are
4. Copy the exported file to the new machine.
5. Use the Import command to select this file and import it into the Meter directory.
Connect to the meter
Procedure
1. From the menu bar, select Meter > Connect or click
2. The Connect to Meter dialog box displays a list of meters setup in Daniel MeterLink.
Collect "As Found" logs and reports
Use the Daniel MeterLink Logs/Reports menu and collect and save the logs and reports for
a historical record of the meter at several velocities within the operating range of the
meter. This will establish a baseline to be used for the trending of the meter diagnostics.
Save the following logs and reports for the "As Found" settings (factory default).
• Maintenance log
Model 3418 GUSM
directory .DAT file to import the file into the currently used meter directory file.
If an identical meter record already exists and a duplicate is trying to be imported,
Daniel MeterLink inserts the duplicate meter record. The Import button performs
the same operation.
dialog to save the exported record to the default folder (C:\Ultrasonic Data) or enter
another location.
prompted to change the file name or replace the file. If changing the file name,
keep the .DAT extension to maintain functionality when importing the file to the
new machine.
Important
Due to limitations in the Microsoft
information for Direct and Modem connection can be exported to the
METER_DIRECTORY.DAT file for Daniel Ultrasonic meters. It will be able to export
the meter names, Comms Address, Interface, and Telephone numbers. It will still be
necessary to recheck the connection properties and verify the communication
parameters such as COM port, data bits, and parity are configured correctly.
toolbar.
Click Direct, Modem or Ethernet next to the Meter Name to establish a connection
with your Daniel Ultrasonic meter.
®
Dial-Up Networking, not all of the directory
, the Connect icon, on the
Communications
January 2019
17