Option 2 - Upgrading Using Individual Upgrade Files; Status; Upgrading Display Firmware; Upgrading Option Module Firmware - Siemens 9810 Series User Manual

9410 series - User manual
10. Confirm upgrade status is complete and upload webpages to the meter. See
page 253
Option 2 – Upgrading using individual upgrade files
Refer to the "Firmware and templates" section in the meter's user manual for detailed instructions
on how to upgrade the meter, display and option module firmware.
1. Follow tasks in the order listed:
To retain your meter settings, select a meter template file (DCF) to paste into the meter
when performing a and b firmware upgrades. Use the Template Paste Options box to
specify the settings to retain after the upgrade.
2. Confirm upgrade status is complete and upload webpages to the meter. See
page 253

Status

After all required meter firmware updates are complete, ION Setup continues to perform the
remaining updates.
• If you selected to upgrade the template, ION Setup will paste the template into the meter.
• If you selected to upgrade 948DISP96 remote display firmware, ION Setup will perform the
display upgrade through the connected DIN rail-mounted meter.

Upgrading display firmware

Refer to the Upgrade 948DISP96 display firmware document to get assistance with upgrading
firmware on a US2:948DISP96 display.

Upgrading option module firmware

You can upgrade option module using ION Setup or directly through the meter's internal SFTP
site.
1. Go to www.usa.siemens.com/pds and search for the US2:948M2AO4AI or
US2:948M2DO6DI firmware file.
2. Download the firmware file.
7EN05-0336-09
for details.
a. 9410_upgradeAgent_V002.001.000.upx
b. 9410_V003.000.000.upx
LOST SETTINGS
Failure to follow these instructions can result in loss of meter settings.
Always select a template file when upgrading the meter firmware.
for details.
NOTICE
Firmware upgrades
"Status" on
"Status" on
253