Table of Contents
Advertisement
Preface
Northrop Grumman Sperry Marine ("NGSM") products may include factory installed
software. By use of such product/s the user explicitly agrees and accepts the terms
and conditions contained within the NGSM End User License Agreement.
The EULA is available to view in the Ships Manual Volume 2, (65900011V2)
Northrop Grumman Sperry Marine B.V. has a policy of continuous development.
This may lead to the equipment described in this manual being at variance with
Industry Recommendations for ECDIS Training
Ship owners and operators should provide crews with a comprehensive
familiarisation program based on the IMO Model Course on ECDIS (1.27).
This training is recommended even when ECDIS is used on vessels to
which SOLAS and IMO STCW (Standards of Training, Certification and
Watchkeeping) do not apply.
Ship owners and operators should always refer to their national
Administrations for the latest regulations governing ECDIS carriage and
use.
vi
NOTICE
Introduction.
equipment manufactured after its publication.
ECDIS User Guide
65900012
Advertisement
Table of Contents
Need help?
Do you have a question about the Visionmaster FT ECDIS and is the answer not in the manual?
Questions and answers
HI THERE , I COULD NOT FIND THE MOB BUTTON IN THE UPPER TOOLBAR AND IN NAV TOOLS , AND THE VIDEO PLAYBACK BUTTON ON IUR SPERRY MARINWE ECDIS.
The MOB (Man Overboard) button can be found in the upper toolbar of the Sperry Marine VisionMaster FT ECDIS. It has a yellow background when the MOB event is active and a standard background color when inactive. However, there is no information provided in the context regarding the location of a video playback button.
This answer is automatically generated
WHAT IS THE PROCEDURES IN MAKING PARALLEL INDEX USING SPERRY MARINE ECDIS
To make a Parallel Index (PI) using Sperry Marine Visionmaster FT ECDIS, follow these procedures:
1. Access PI Lines: Left-click on the "Parallel Index Lines" field in the NAV Tools menu.
2. Use the PI Lines Window: This window has three tabs:
- Edit Tab: Add a new PI line or set, copy, delete, rename, or realign lines to the ship's current heading.
- Display Tab: Select which PI lines to display.
3. Define Each PI Line: Set the following parameters:
- Range from the closest point to own ship
- Bearing
- Line type
- Side of the ship (port or starboard)
Up to fifteen PI lines can be displayed at once across the entire chart display in all modes.
This answer is automatically generated
AIS target not showing in ecdis