Sperry Marine Visionmaster FT ECDIS User Manual page 315

ECDIS User Guide
Alert Type
Autopilot Interface An interface to the autopilot has failed.
Failure
Autopilot Power Power supplied to autopilot has failed.
Failure
Autopilot Power Power level supplied to autopilot has been reduced.
Reduced
Autopilot software When in HDG or Joystick mode, autopilot will not automatically
update needed adjust rudder bias. This can adversely affect steering accuracy in
significant currents or winds. Autopilot software update is available
to correct. Note - rudder bias is applied correctly when using the
NP4000 in AUTO mode and when operating in Track mode.
AZ Entry Target has entered an Activation Zone
AZ Full Activation Zone Full
Azimuth Error Number of azimuths per revolution has varied from its nominal
value of 4096
Backup Navigator Description text set at runtime.
Blank sectors invalid Tracker - blank sectors failed to configure
Bow Crossing Limit Target has infringed bow crossing limits.
Bow Ground Speed Sensor Bow Ground Speed Integrity VisionMaster FT
Unusable
Bypassed Critical One or more critical points have been bypassed by temp route.
Point(s)
Chart Available No chart displayed at the ship's position, but a chart is available for
the ship's position.
Chart Cautions Cautions found on the chart along the ship's present course.
65900012
Description
Alerts
Priority Notes
Warning
Warning
Warning
Caution
Warning
Warning
Warning
Emergency
Warning
Alarm
Alarm or Depending on
Caution configuration
Warning
Warning
Alarm
7-17