Table of Contents
Advertisement
ECDIS User Guide
The structure of this manual and the design of the pages can help you to
find the information that you need. Consistent presentation techniques are
used throughout the manual, to make it easy to use.
Depending on the composition and configuration of your
installation, not all of the facilities presented in this User Guide may
be applicable to your system.
This manual is intended to be used by the VisionMaster FT operator and is
divided into the following chapters, appendices and annexes:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Chapter 10
Chapter 11
Chapter 12
Chapter 13
Annex A
Your system may include optional features or purchased features that are not
described in this manual. For information on these optional features, refer to
Supplementary Features User Guide, 65900014.
65900012
PREFACE
ABOUT THIS MANUAL
-
Overview
-
Getting Started with ECDIS
-
Basic Operation of ECDIS
Appendix A - Operational Functions specific to
Multi-node and Client/Server Systems
-
Charts
Appendix A - Chart Datum Codes
-
Navigation Tools
-
Sensor Management
-
Alerts
-
Routes
-
Electronic Range and Bearing Lines
-
Targets
-
Radar
-
Brilliance
-
System
-
Static Site
Preface
v
Advertisement
Table of Contents
Need help?
Do you have a question about the Visionmaster FT ECDIS and is the answer not in the manual?
Questions and answers
HI THERE , I COULD NOT FIND THE MOB BUTTON IN THE UPPER TOOLBAR AND IN NAV TOOLS , AND THE VIDEO PLAYBACK BUTTON ON IUR SPERRY MARINWE ECDIS.
The MOB (Man Overboard) button can be found in the upper toolbar of the Sperry Marine VisionMaster FT ECDIS. It has a yellow background when the MOB event is active and a standard background color when inactive. However, there is no information provided in the context regarding the location of a video playback button.
This answer is automatically generated
WHAT IS THE PROCEDURES IN MAKING PARALLEL INDEX USING SPERRY MARINE ECDIS
To make a Parallel Index (PI) using Sperry Marine Visionmaster FT ECDIS, follow these procedures:
1. Access PI Lines: Left-click on the "Parallel Index Lines" field in the NAV Tools menu.
2. Use the PI Lines Window: This window has three tabs:
- Edit Tab: Add a new PI line or set, copy, delete, rename, or realign lines to the ship's current heading.
- Display Tab: Select which PI lines to display.
3. Define Each PI Line: Set the following parameters:
- Range from the closest point to own ship
- Bearing
- Line type
- Side of the ship (port or starboard)
Up to fifteen PI lines can be displayed at once across the entire chart display in all modes.
This answer is automatically generated
AIS target not showing in ecdis