Option 42 - Codes (Quick Menu Option 8) - Honeywell Galaxy 18Galaxy Programming Manual

42 - Codes
Option 42 – Codes (Quick Menu Option 8)
The Codes option is used to assign, modify and delete the codes that allow users to operate and access the
system. The Codes option is divided into three sub-menus:
1. User Codes — sub-divided into up to 10 menus (depending on panel used and whether the group and
MAX mode options are enabled) that determine all of the access information for users who are requiring
PINs. This option also assigns MAX details to user numbers;
2. PIN Warning — (Galaxy 128, 500, 504 & 512) determines the warning period given to users prior
to the programmed PIN Change date (refer to option 51.42 = PARAMETER.PIN Change);
3. MAX Users (V3 and earlier) — this option is only available if the MAX mode is enabled. The option
is subdivided into 2 menus that assign the MAX card to users who do not have a PIN assigned.
Programming Codes
1 = User Codes
2 = PIN Warning
3 = MAX Users
Galaxy Programming Manual
1 = Modify Pin
2 = Modify Level
3 = Modify Name
4 = Time Zone
5 = Temp Code
6 = Modify Groups
(not G8)
7 = MAX Number
8 = MAX Function
9 = MAX Keypad
10 = Forgive
Antipassback
1 = MAX Number
2 = Groups
Figure 3. Programming Codes
28
4, 5 or 6 digit pin
1 - 6
6 alpha-numeric characters
0 = Off
1 = Timer A
2 = Timer B
3 = Timer A+B
00-99 days
G18: 1-3
G60: 1-4
G128: 1-8
G500: 1-16
G504: 1-32
G512: 1-32
10 digit number on MAX card or fob
number of required menu option
address of keypad that MAX function displays on
This function clears passback restrictions
1 - 28 days
10 digit number on the MAX card
G18: 1-3
G60: 1-4
G128: 1-8
G500: 1-16
G504: 1-32
G512: 1-32