Honeywell Galaxy 18Galaxy Programming Manual page 118

56 - Communications (cont'd)
15 Priority
Not used
16 Force V.21
This is used to change the modem speed to 300 baud. This option may require to be selected when using the
Telecom module on PSTN lines shared with RedCARE devices.
17 SMS
The SMS option is available on Galaxy panels with V4.00 and above software and Telecom modules with
V5.xx and above software. This option generates and transmitts SMS text messages, for events generated by
the Galaxy panel.
1=Mobile No.
This is a 22 digit telephone number and is the mobile phone number of the recipient of the message.
2=Centre No.
This is a 22 digit telephone number and is the phone number of the SMS centre. The default is different for
each operator.
3=Format
The options for this menu are:
1=TAP
For mobile phones (UK)
2=UCP (SMS)
For mobile phones (outside UK)
3=UCP (Minicall)
For alpha pagers
4=UCP (Numeric)
For numeric pagers
4=Site ID
This is a 16 character alphanumeric string and is used to identify the panel/site sending the message. If the
format is UCP (Numeric), then the site ID is numeric only, and only the first four characters are sent out.
5=Password
This is a 16 character string and is an optional field required by some paging centres.
Galaxy Programming Manual
112