Honeywell Galaxy 18Galaxy Programming Manual page 44

42 - Codes (cont'd)
If a user's card number is assigned a *, then the card becomes Dual access. This means that it will not open
the door on its own; it needs another PIN or card as well. If the PIN belonging to the same user has a #
assigned, then that PIN must be entered first before access will be granted to that card.
If the PIN has no # assigned, then the card will work only in conjunction with any other Dual Access card that
shares one or more groups (see option 42 = Codes for programming).
10 = Forgive Antipassback (V4 and above)
This function if selected clears all antipassback restrictions for the selected user.
2 = PIN Warning (Galaxy 128, 500, 504 & 512)
This option determines the number of days notification before the PIN Change expiry date (refer to option
51.42 = PARAMETERS.PIN Change) that the user is prompted to assign new code on entry of the expir-
ing PIN. The default period is 28 days, with a programmable range of 1 – 28. If the user does not assign a
new code by the end of the PIN Warning period, then the code is erased on the next unsetting of the system.
NOTE: The PIN Warning ends on the last day of the month, the PIN expires on the first day of the
following month.
3 = MAX Users
Note: This option does not apply to V4 and above software.
This option is used to assign additional MAX users to the system without allocating PINs; MAX users are
only authorised to operate the Access Control functions of the MAX modules.
Enter the Codes option and select 3=MAX Users. Press the ent key; the first MAX user number (User 501)
is displayed. Each of the users can be displayed using the A and B keys, or a specific user can be selected by
entering the required user number, for example 223, 469. When the required code is displayed, press the ent
key; the 1 = MAX Number option is displayed.
1 = MAX Number
The MAX number assigned to the MAX user identifies the MAX card to the system and references it to the
MAX user.
Each MAX Number defaults to 0000000000 (ten zero's):
1. press and hold the B key until the zeros are deleted;
2. enter the unique 10 digit number laser etched onto the MAX card;
3. press the ent key to save the programming and return to the previous menu level.
When a MAX number has been assigned to a MAX user number, a solid box ( ) is displayed on the top line
of the MAX user number details screen.
2 = Groups
This option assigns group access to the MAX user. The MAX user must be assigned a group that is common
to the MAX module to permit the access control functions to operate. If the MAX user does not have access
to the group assigned to the module, then the access control functions are denied. The Modify Groups option
is only available when the group mode has been enabled (refer to option
63.1 = OPTIONS.Groups); the system defaults to groups disabled.
Galaxy Programming Manual
38