Honeywell Galaxy 18Galaxy Programming Manual page 139

Galaxy Programming Manual
56 - Communications (cont'd)
1 = On
If selected encryption is enabled for the Galaxy Gold remote servicing sessions. In order for data to be re-
ceived when this option is selected the receiver must support decryption.
3 = SIA Control
0 = Off
This option controls encryption for communications between the Ethernet module and remote PC using the
SIA control command protocol. Default is disabled.
1 = On
If selected encryption is enabled for for communications between the Ethernet module and remote PC using
the SIA control command protocol. In order for data to be received when this option is selected the receiver
must support decryption.
4 = Alarm Mon.
This option controls encryption for the Alarm Monitoring alarm transmission paths. Default is disabled.
0 = Off
If selected encryption is disabled for the Alarm Monitoring alarm transmission paths.
1 = On
If selected encryption is enabled for the Alarm Monitoring alarm transmission paths. In order for data to be
received when this option is selected the receiver must support decryption.
133