Option 68 - Menu Access (Galaxy 60, 128, 500, 504 & 512) - Honeywell Galaxy 18Galaxy Programming Manual

Galaxy Programming Manual
Option 68 – Menu Access (Galaxy 60, 128, 500, 504 & 512)
The Menu Access option is used to assign access levels to each of the menu options. This allows code levels
3 – 6 to have access to menu options to which they would normally have insufficient access rights.
On selecting this option, 11 = OMIT ZONES is displayed along with the current code levels assigned (3456
default).
Use the A or B key to select the required menu option or enter the option number directly and press the ent
key. The currently assigned levels appear displayed on the top line of the display. The level maps default to the
standard access. To modify the levels, press the required number keys; this toggles the access level numbers
on the bottom line of the display on and off.
Press the ent key to save the programming and return to the previous menu level. If the level is assigned to the
option the number is displayed, if it has been removed a dash (–) is displayed.
For example, level 5 codes can be given access to menu 42 which would allow them to allocate codes.
Users can only allocate codes up to the level that they have been assigned. A level 4 user cannot assign a user
code as level 5.
NOTE: The following menu access levels are fixed: option 48 = DATELOCK level 6, and option 68 =
MENU ACCESS engineer access (level 7 and 8).
Levels 3456
11=OMIT ZONES
Levels 3456
>__5_
Levels ––56
42=CODES
163
68 - Menu Access