Honeywell Galaxy 18Galaxy Programming Manual page 113

Galaxy Programming Manual
1 = Telephone Number
To assign a telephone number to the group press the ent key and enter the required number. The telephone
number can be a maximum of 22 digits (including dial pause
ent key to save the programming and return to the previous menu level.
2 = Account Number
To assign an account number to the group press the ent key and enter the required number. The account
number can be a maximum of six digits; press the ent key to save the programming and return to the
previous menu level.
3 = Microtech
Microtech format is a protocol that transmits detailed point identification information to a Personal Computer
(PC) which has the Galaxy Alarm Monitoring software installed.
The menu structure and programming of the options are identical to the SIA format. Refer to 2 = SIA for
programming details.
4 = Contact ID
Contact ID format is a protocol which transmits point identification information to an Alarm Receiving Centre
that is capable of receiving the Galaxy variant of contact ID.
The menu structure and programming of the options are identical to the SIA format. Refer to 2 = SIA for
programming details.
02 Telephone No. 1
Telephone number 1 must be entered. This is the main telephone number that the alarms are signalled to. Up
to 22 digits may be entered, including control modifiers. The control modifiers are entered using the
keys:
Pause (for two seconds before dialling the next digit). Multiple entries can be made, for example,
entering gives a six second pause.
# Dial tone detect (wait for new dial tone). Each dial tone detect lasts for 15 seconds. Multiple entries can
be made, for example, entering ## gives a 30 second dial tone detect. If a new dial tone is not detected in this
time, then the dialling attempt is aborted. This is counted as a fail to communicate.
The B key is used to erase an existing telephone number. Each press deletes the last digit displayed.
03 Account No.
This is the site identifier. A unique account number must be entered, this can be up to a maximum of 6 digits
although 4 digits is the standard.
The B key is used to erase an existing number. Each press deletes the last digit displayed.
NOTE: Entering the account number into this menu option automatically copies the number to all channel or
group triggers in the selected format. Any individual account numbers that have been programmed
are overwritten.
56 - Communications (cont'd)
and dial tone detect # characters); press the
107
and #