Honeywell Galaxy 18Galaxy Programming Manual page 48

45 - Timer Control (cont'd)
2 = Early Open
Level 6 Users and Engineer when Groups are Disabled
If groups have not been enabled on the system, the programming of the Early Open option is identical for
Level 6 users and the engineer; the option permits early opening to be disabled or enabled:
0 = Disabled (default) — early opening not permitted;
1 = Enabled — early opening permitted.
Select the required status and press the ent key to accept the programming and return to the previous menu.
Engineer Mode with Groups Enabled
If groups have been enabled (option 63 = OPTIONS + early open permitted), then the groups can be
individually enabled to permit early opening.
On selecting the option, the early opening status of the groups is displayed; early opening enabled is indicated
by a Y below the group; an N is displayed below the groups that are not programmed to open early. All
groups default to N.
NOTE: Only the engineer can enable early opening for individual groups, but global enable must be done
first.
5 = Late Work
The Late Work option — if programmed as 1 = ON — authorises an Autoset Extension in advance of the
prewarning period (refer to option 65.3 = TIMERS.Autoset);
NOTE: Additional extensions can be authorised by entry of a valid code during the subsequent autoset
prewarning periods.
6 = Weekend Work (Galaxy 504 & 512)
The Weekend Work option allows a valid user code to authorise the system to unset at the weekend. If the
Weekend Day is programmed other than 0 = OFF (default), on the next occurrence of the programmed
Weekend Day, the Timers adopt the times they have on the assigned Pattern day. For example, this
allows a Sunday to use the Autoset and Lockout Timers of a Monday.
NOTE: Parameter 41 = Weekend Work must be enabled (default is Disabled) to allow the Pattern Day
option to be programmed by the engineer and the Weekend Day to be selected by the user.
On selecting this option, 1 = Program Days is displayed. Press the ent key; 1 = Weekend Day is dis-
played. Press ent to select this option, or the A or B keys to move between the available options.
Galaxy Programming Manual
42