Option 43 - Summer (Quick Menu Option 9); Option 44 - Trace (Galaxy 18, 60, 128, 500, 504 & 512) - Honeywell Galaxy 18Galaxy Programming Manual

Galaxy Programming Manual
On selecting the Modify Groups option, the groups currently allocated to the user are displayed. All user
default to group 1. Pressing the group number toggles the group assigned to the user; pressing 2 and 3 assign
groups 2 and 3 to the user; pressing 1 (when group 1 is already assigned) removes group 1 from the user
code; press the ent key to accept the programming and return to the previous menu level.
Galaxy 500, 504 & 512
The Galaxy 500, 504 and 512 have more than 8 groups; these are displayed on the keypad in blocks of eight
groups. Press A or B keys to display each of the group blocks.
Press keys 1 – 8 to assign the relevant groups in each block to the user.
Option 43 – Summer (Quick Menu Option 9)
The Daylight Savings Time is in accordance with European standards. The Daylight Savings time is described
as follows:
On the first day of each year, the British Summer Time (BST) Start date is set to the last Sunday in March
and the End date is set to the last Sunday in October.
The operation of the Summer option is as follows: at 01:00 hours (GMT) on the Start date, the system
clock advances to 02:00 hours (DST); at 02:00 hours (DST) on the End date, the system clock goes back to
01:00 hours (GMT).
NOTE: The time always changes with reference to GMT. For example, Italy, which is +1 hour would be:
Last Sunday in March - 02.00 to 03.00
Last Sunday in October – 03.00 to 02.00
The Start and End dates can be reprogrammed by authorised user codes. Press the A key to modify the
Start date or the B key select the End date; the new date must be a valid 4 digit number - in the day/month
format (dd/mm).
Galaxy 512
The Summer option can only be modified by the engineer or remote codes.
Option 44 – Trace (Galaxy 18, 60, 128, 500, 504 & 512)
This option provides a record of the most recent alarm activation. The Trace option records the details of the
setting and unsetting of the system immediately before and after the alarm activation and the first 5 events
occurring during the alarm activation. This information is maintained in the trace until the next alarm activation.
On entering the option pressing the A and B keys steps through each of the 7 trace entries.
Pressing the # key while viewing the Trace option displays additional information about certain events — user
events reveal the keypad, user level and current group; alarm events reveal the zone descriptor if pro-
grammed.
The currently display trace can be printed out by pressing the
out.
NOTE: A serial printer must be connected to the Galaxy panel via a printer interface module or an RS232
interface module.
43 - Summer/44 - Trace
key; pressing the esc key aborts the print-
39