Honeywell Galaxy 18Galaxy Programming Manual page 149

Hide thumbs Also See for Galaxy 18Galaxy:
Table of Contents

Advertisement

Galaxy Programming Manual
2 = Setting Logic
The Setting Logic option restricts a group from setting by determining which other groups must be set before
it can set. For example, group 1 may be prohibited for setting unless groups 3, 7 are already set. The Set-
ting Logic is individually defined for each group.
Programming Setting Logic
On selecting the Setting Logic option, group 1 is displayed. Use the A or B keys to move to the required
group or directly select it by pressing the required group number; press the ent key to access the group. On
selecting the group, the current Setting Logic details are displayed:
S below a group means that it must be set to allow the selected group to set
a dash (–) below the group indicates that the set status of this group is not important.
Toggle the status between S and – by pressing the number key. When the required setting logic pattern has
been defined press the ent key to accept the programming and return to the previous menu level.
Galaxy 504 & 512
The Galaxy 504 & 512 have 32 groups; these are displayed on the keypad in block of eight groups, sub-
divided into A, B, C and D:
Use the A or B key to move between the group blocks; press keys 1 – 8 to toggle the Setting Logic for the
relevant groups in each block.
Setting Logic Operation
If Setting Logic has been assigned to a group, the set status of the groups must satisfy the conditions defined
in the option to permit the group to set. If the Setting Logic conditions are not satisfied, then the group
cannot set. If multiple groups are being set simultaneously, but one group is restricted due to the programmed
Setting Logic, the remainder of the groups set. The restricted group does not set; there is no warning or
indication given.
If the programmed Setting Logic results in none of the selected groups being allowed to set, a warning
message is displayed on the keypad.
This message does not appear if at least one group sets.
G
o r
u
p
B
o l
c
k
A
1
8 -
B
1
8 -
C
1
8 -
D
1
8 -
Table 26. Groups
2 Groups not set
[<],[>]
to view
63 - Options (cont'd)
P
h
y
s
c i
l a
G
o r
u
p
s
1
8 -
9
1 -
6
1
7
2 -
4
2
5
3 -
2
143

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents