Output Test (32 Ent); Time/Date (41 Ent); Codes (42 Ent) - Honeywell Galaxy Flex User Manual

Output Test (32 ent)

Use this option to test the external bell and strobe.
To test a bell or strobe:
1. Select either bell or strobe, and then press
displayed.
2. Press to toggle the status on or off to test the device.
ent
3. Press to end the test.
esc

Time/date (41 ent)

Use this option to set the system time and date. There are two sub-options;
A=TIME and B=DATE.
Enter time in 24 hour notation (hh:mm), and the date in 6-digit notation
(dd/mm/yy).

Codes (42 ent)

The system can have up to 100 users, with user codes assigned as follows:
001 to 097 assigned to any user
098 reserved for Manager
099 reserved for Engineer
100 reserved for remote access
You can give each user a PIN code, a wireless keyfob and/or a prox tag. Once
assigned, users can modify their own PIN codes. You can also assign an access
type that controls what the user can and can't do.
Press 42 1
ent ent
example is shown below:
user code
user type (level)
Use and to scroll to other users.
A B
Press to show the options for that user, starting with Modify PIN. Use
ent
to scroll between the options.
to view users. The first user details are displayed and a typical
user name
001 USER
L3
group choice
. The device state (on or off) is
ent
RF fob
assigned
R □ m
A *12345678
assigned groups
= no PIN assigned
■ = PIN assigned
prox tag
assigned
and
A B
21