Unpacking The System; Box Contents; Preinstalled Components; Components To Be Installed - Infortrend S12 Series Hardware Manual

Unpacking the System

2 0
Compare the Unpacking List included in the shipping package against the actual
package contents to confirm that all required materials have arrived.

Box contents

9 0
For detail box content(s), please refer to the unpacking list that came with the
system.
The accessory items include a serial port cable, screws, Quick Installation Guide, a
CD containing the SANWatch management software and its manual and Firmware
Operation Manual, and a product utility CD containing the Installation and
Hardware Reference Manual (this document).

Preinstalled Components

9 1
Shown below are the components pre-installed in the system:
 LCD/LED front panels
 Chassis ears with plastic caps
 DIMM module for RAID models
 CBM (dual controller systems, please refer to
 PSUs including cooling modules

Components to Be Installed

9 2
You must install the following components:
 The enclosure itself (please refer to the
 Controller module(s)
 Hard drives
 Drive trays
 Cabling
 CBM (single controller systems, please refer to
 Earth lead cable (DC PSU systems only)
EonStor / EonStor DS S12/S16/S24 Series
(CBM) for RAID Models)
(CBM) for RAID Models)
Cache Backup Module
Slide Rail Kit Installation
Cache Backup Module
52
Guide)