Table of Contents
Advertisement
2.4
Unpacking the Subsystem
Compare the Unpacking List against the actual packing contents to confirm
that all required materials have been received. Carefully check the items
contained in each box before proceeding with installation.
Do not rely on the non-definitive, summarized unpacking list shown
below--it is for reference only. A detailed packing list can be found in your
product shipping package or product CD.
Each packed box is separated into upper and lower levels.
Upper level box contents:
•
Lower level contents: Three (3) boxes are placed in the lower level. Sitting
at the bottom is the enclosure chassis with all the pre-installed components.
The other two (2) boxes contain the power cords and accessory items.
Accessory items include an RS-232C (2 audio jack to 1 DB9) Y-cable or
straight-through cable, null modem, Quick Installation Guide, screws, and
a CD containing the RAIDWatch Manager software and its manual,
Installation and Hardware Reference Manual (this document), and the
interface-oriented Operation Manual (Firmware configuration utility).
Unpacking the Subsystem
Figure 2-1: Installation Procedure Flowchart
WARNING!
Sixteen (16) drive canisters
Chapter 2: Hardware Installation
2-5
Advertisement
Table of Contents
