Table of Contents
Advertisement
2. Align and adjust the l
and left rear slide rail (05). Do the same for the right front slide rail (02) and the right
rear slide rail (04) so they match the clip nuts.
3. Fasten two M5 x 10mm truss head screws (06) through the middle two screw holes on
the front side of the slide brackets to the middle two clip nuts on the front rack posts.
4. Fasten two M5 x 10mm truss head screws (06) through the middle two screw holes on
the rear slide brackets to the clip
necessary.
06
Front rack post
IFT-9272CSlide28/36-0030 Slide Rail Kit
ength of the slide brackets by sliding the left front slide rail (03)
05
02
03
Adjust slide rail lengths
nuts on the rear rac
09
09
Secure slide rails to front and rear posts
197
04
k posts. Install clip nuts (09) if
09
09
Rear rack post
06
Advertisement
Table of Contents
