Infortrend S12 Series Hardware Manual page 213

6. It is strongly recommended that two people perform this procedure together! To mount
the enclosure onto the rail and into the rack, place the enclosure on the installed rails
and slide it into the rack until the front ears of the enclosure meets the front rack posts.
7. Secure the enclosure by using two #6 32x10mm flathead screws at the rear and four
M5 x30mm screws on the forearm handles (forearm handles can also be secured
using M6 / 10-32 screws from the system accessory box)
IFT-9373CSlider36 Slide Rail Kit
Securing a filler plate behind enclosure ears
Mounting the enclosure into the rack cabinet
213
04
06