Table of Contents
Advertisement
NEBS GR-1089 REQUIREMENTS
The ESDS S12F-R2840
Office, NEC.
The ESDS S1
2F-R2840N & ESDS S12S-J2000N shall be installed and connected to the
CBN, IBN.
The ESDS S12F-R2840N & ESDS S12S-J2000N only crafts personnel are allowed
access.
The battery returns of the ESDS
as DC-
I.
The ESDS S12F-R2840N & ES
at a maximum current level 22A
WARNING
The intra-building ports of
to intra-building or unexpo
equipment or subassembl
connect to the OSP or its
intra-building interfaces on
GR-1089-CORE, Issue 6)
addition of Primary Protec
interfaces metallically to OSP wiring.
Only Cop
per cond
uctors shall be u
S12S-J2000N.
All Bare grounding connection p
shall be cleaned and coated wit
All surfaces on the ESDS S12F-R28
brought to a bright finish and treated with an anti-oxidant solution before connections are
made.
All non-conductive surfaces of the ESDS S12F-R2840N & ESDS S12S-J2000N shall be
removed from all threads and connection points to ensure electrical continuity.
EonStor / EonStor DS S12/S16/S24 Series
N & ESDS S12S-J2000N is suitable for
S12F-R2840N & ESDS S12S
DS S12S-J2000N is capable of operating 36Vdc to -48Vd
.
the equipment or
sed wiring or cabling only. The in
y MUST NOT be metallica
wiring. These interf
ly (Type 2 or Type 4 ports
and require isolation
tors is not sufficient protec
sed t
o ground the ESDS S12F-R2840N & ESDS
oints to the
ESDS S12F-R2840N & ESDS S12S-J2000N
h an anti-oxid
ant solution before connections are made.
40N & ESDS S12S-J2000N that are
187
connection to the Central
-J2000N shall be connected
subassembly are suitable for connection
tra-building port(s) of the
lly connected to interfaces that
aces are designed for use as
as described in
from the exposed OSP cabling. The
tion in order to connect these
c
unplated shall be
Advertisement
Table of Contents
