Infortrend S12 Series Hardware Manual page 198

5. Attach the inner brackets (01) to the sides of the subsystem chassis using five #6-32 x
6mm flat head screws (08) for each inner bracket. The inner brackets will protrude
75mm from the rear end of the chassis.
6. Gently lift the subsystem so that the inner brackets (01) on the chassis can be inserted
into the slide brackets (04). K
subsystem into the rack.
0 4
IFT-9272CSlide28/36-0030 Slide Rail Kit
08
Attaching inner brackets
eep pressure even on both
0 1
Inner bracket meeting slide rail
01
sides and gently push the
198