System Maintenance - Infortrend S12 Series Hardware Manual

EonStor / EonStor DS S12/S16/S24 Series

System Maintenance

4
WARNING
Do not remove a failed component from the system until you have a replacement on
hand. If you remove a failed component without immediate replacement, it will
disrupt the internal airflow.
Qualified engineers who are familiar with the system should be the only ones who
make component replacements.
Whe n inserting a removable module, do not use excessive forc
slamming a module can damage the connector pins either on the module itself or on
the backplane.
The following components can be replaced:
 Controller module (please refer to
 Memory module (please refer to
RAID Models)
 CBM module (please refer to
 PSU module (please refer to
 Hard drive (please refer to
Replacing the Controller
Replacing the Memory Module for
Replacing the CBM for RAID
Replacing the Power Supply
Replacing the Hard Disk Drive
142
e. Forcing or
Module)
Models)
Module)
)