Table of Contents
Advertisement
Drive Tray
7 4
The drive tray is designed to accommodate separately purchased 3.5-inch SAS or
SATA interface hard disk drives. There is a rotary bezel lock (1) that secures the drive
tray in chassis, while a release button (2) can be used when retrieving disk drives
from the chassis. To the right of the bezel plate, there is a drive busy LED (3) and a
power status LED (4).
WARNING
Be careful not to warp, twist, or contort the drive tray in any way (e.g., by dropping it
or resting heavy objects on it). If the drive bay superstructure is deformed or altered,
the drive trays may not fit into the drive bay.
Drive bays are arranged as four bays wide by three, four or six bays high. The drive
bays are numbered from left to right and from top to bottom.
EonStor / EonStor DS S12/S16/S24 Series
1
2
2
1 1
5
6
9
10
2U
2
1 1
5
6
9
10
13
14
3U
2
1 1
5
6
10
9
14
13
18
17
21
22
4U
35
3
4
3
4
8
7
11
12
3
4
8
7
11
12
15
16
3
4
8
7
12
11
15
16
19
20
23
24
Advertisement
Table of Contents
