Infortrend S12 Series Hardware Manual page 157

EonStor / EonStor DS S12/S16/S24 Series
5. Install the replacement module
its lowest position so that the sa
onto the metal anchor pins (2) on the interior walls of the PSU slot. Push the PS
into chassis, and when you feel the contact resistance, pull the handle up
to secure the module.
6. Secure the PSU to the system by fastening the retention screw through the PSU
extraction handle.
7. Recon nect the power cord.
8. Power on the PSU module.
. Make sure the extraction handle (1) is held at
ddle notches on the sides of the handle can snap
157
U
wards