Infortrend S12 Series Hardware Manual page 189

EonStor / EonStor DS S12/S16/S24 Series
System model numbers with a designated "N" are powered by DC PSUs.
The kit is for DC PSU systems only and the earth lead kit MUST be installed before
you power on your system . The earth lead cable, dedicated screws and cage nut can
be found in the accessory box. It is recommended to install the earth lead kit once
the enclosure has been in stalled into the cabinet.
To install, att ach one end of the earth lea d cable to the enclosure and secure it with
the dedic ated screw as shown in the illustration below:
Attach the other end of the earth lead cable to
the cabinet rack post with the dedicated screw.
If you r cabinet rack po st does not come with
screw threads, use the cage nut provid ed to
secure it to the rack post.
189