Table of Contents
Advertisement
EonStor / EonStor DS S12/S16/S24 Series
5. Power off the RAID system.
6. Press and hold the Restore Default button (in
Controller A. You may use a straightened paper clip to press the button. While
pressing the
Restore Default button down, power on the RAID system.
7. When the "Restore Def." LED (indicated by the black arrow) lights up and the
"Default Restored" firmware event message appear, you may release
Restore Default butto
8. Restore previous settings using the "Import NVRAM from reserve
"Restore NVRAM from Files" in the firmware. ID/LUN mapping will be restored.
RAID model No.
Ent
Ready
Import NVRAM
Ent
include password?
except password?
Ent
Import NVRAM
in progress
Legend
Ent: Press the Enter (Ent) button.
Ent: Press and hold the Enter (Ent) button for 2 seconds.
---->: Press the up and down arrow to scroll to the menu you are after.
*The
Single controller system's restore default procedure is compl
Controller systems, please continue with the following procedures.
9. Power of
f the system.
10. Replace Controller A with Controller B (Controller B will be inserted into
Controller A's slot) While leaving Controller B slot empty with Controller B in slot
A, perform the above steps 1 to 8 to restore Controller B to defa
11. Put both Controller A and Controller B into their original positions and power up
the system.
n (the system default has been restored).
View and Edit
Logical Drives
Import NVRAM from
Export NVRAM to
reserve space
reserve space
141
dicated by the
blue
Mute Beeper
System
Ent
Functions
Controller
Ent
Maintenance
ete and for Dual
ult settings.
arrow) on
the
space" or
Advertisement
Table of Contents
