Table of Contents
Advertisement
Controller Module of JBOD Models
7 6
The expansion JBOD controllers features SAS expansion ports (1), SAS expansion
port status LEDs* (2), controller status LEDs (3), extraction levers and retention
screws (4) and convection holes* (5).
* indicates the component is not present on all models
J1000 JBOD models (8470 SAS connector type)
J1002R & J2000 JBOD models (8088 SAS connector type)
4
The expansion controller contains a circuit board within a metal canister, interfaced
through hot-swap docking connectors at the back-end. Two SAS wide ports on the
interface faceplate
WARNING
The only time you should remove the controller is to replace a failed controller. The
controller is built of sensitive components and unnecessary tampering can damage
the controller.
EonStor / EonStor DS S12/S16/S24 Series
4
1
2
1
connect to a managing RAID system or other
3
5
3
2
1
37
4
4
JBODs.
Advertisement
Table of Contents
