Unpacking The System; Box Contents; Preinstalled Components; Components To Be Installed - Infortrend EonStor DS 1024B Hardware Manual

Unpacking the System

Compare the Unpacking List included in the shipping package against the actual
package contents to confirm that all required materials have arrived.

Box contents

For detail content(s), please refer to the unpacking list that came with the system.
The accessory items include a serial port cable, screws, Quick Installation Guide, a
CD containing the SANWatch management software and its manual and Firmware
Operation Manual, and a product utility CD containing the Installation and
Hardware Reference Manual (this document).

Preinstalled Components

Shown below are the components pre-installed in the system:
 Controllers
 LED front panels
 Chassis ears with plastic caps
 DIMM module for RAID models
 CBM (dual controller systems)
 PSUs including cooling modules
 Host board

Components to Be Installed

You must install the following components:
 The enclosure itself (please refer to the
 Hard drives
 Cabling
 CBM, if purchased separately as an optional accessory
Slide Rail Kit Installation
32
Guide)