Infortrend S12 Series Hardware Manual page 57

To install the MUX board and its support plate (go to step 2 if you are installing
a brand new system that is not yet in operation):
1. Identify the hard drive tray you would like to install the MUX board onto by starting up
your SANWatch Manager and go to Storage Manager > Information > Enclosure
View
The icons indicate the current status of each hard drive tray
Icons
2. Remove the tray you wish to install the MUX board to, from the enclosure. Use a
flat-blade screwdriver to set the rotary bezel lock in the horizontal orientation.
EonStor / EonStor DS S12/S16/S24 Series
The drive tray is filled with an available hard drive.
The drive tray is empty.
The drive is a
The drive tray does not exist or the hard drive is not
ready for operation due to testing or other reasons.
57
spare drive.