System Maintenance
WARNING
Do not remove a failed component from the system until you have a replacement on
hand. If you remove a failed component without immediate replacement, it will
disrupt the internal airflow.
Qualified engineers who are familiar with the system should be the only ones who
make component replacements.
When inserting a removable module, do not use excessive force. Forcing or
slamming a module can damage the connector pins either on the module itself or on
the backplane.
The following components can be replaced:
Controller module (please refer to
Memory module (please refer to
RAID
Models)
CBM module (please refer to
Host board (please refer to
PSU module (please refer to
Hard drive (please refer to
Replacing the Controller
Replacing the Memory Module for
Replacing the CBM for RAID
Replacing the Controller Host
Replacing the Power Supply
Replacing the Hard Disk
110
Module)
Models)
Board)
Module)
Drive)