System Maintenance - Infortrend EonStor DS 1000 Gen2 Series Hardware Manual

System Maintenance

WARNING
Do not remove a failed component from the system until you have a replacement on
hand. If you remove a failed component without immediate replacement, it will
disrupt the internal airflow.
Qualified engineers who are familiar with the system should be the only ones who
make component replacements.
When inserting a removable module, do not use excessive force. Forcing or
slamming a module can damage the connector pins either on the module itself or on
the backplane.
The following components can be replaced:
 Controller module (please refer to
 Memory module (please refer to
Storage Systems)
 CBM module (please refer to
 Host board (please refer to
 PSU module (please refer to
 Hard drive (please refer to
Replacing the Controller
Replacing the Memory Module for
Replacing the CBM for Storage
Replacing the Controller Host
Replacing the Power Supply
Replacing the Hard Disk
111
Module)
Systems)
Board)
Module)
Drive)