Configuring Raid - Huawei TaiShan 200 Series User Manual

TaiShan 200 Server
User Guide (Model 2280)
. done
Un-Protected 1 sectors
Erasing Flash...
. done
Erased 1 sectors
Writing to Flash... done
. done
Protected 1 sectors
password be changed successfully.
Step 10 Run the following command to exit U-Boot:
boot
----End

5.10.7 Configuring RAID

Step 1 Log in to the iBMC WebUI. For details, see
Step 2 Query RAID controller card information.
●
●
Step 3 Configure a RAID array.
The RAID configuration method varies according to the RAID controller card
model. For details, see the
----End
Issue 04 (2020-01-16)
If the iBMC version is earlier than V500, choose Information > System Info >
Other Devices. The page shown in
Figure 5-42 RAID controller card information (earlier than iBMC V500)
If the iBMC version is V500 or later, choose System > Storage Management.
The page shown in Figure 5-43
Figure 5-43 RAID controller card information (iBMC V500 or later)
The information shown in
may differ.
Copyright © Huawei Technologies Co., Ltd.
5.10.4 Logging In to the iBMC
Figure 5-42
is displayed.
Figure 5-43 is for reference only. The actual information
TaiShan Server RAID Controller Card User Guide
5 Install and Configure
is displayed.
WebUI.
.
83